• OPERATION AND CONTROL

    Superb operability and ergonomic grip performance

    Manual Controls | Advanced SR AUTO Mode
    Exposure Compensation | Focus Lever
    Customize | Rear Layout
    | Firm Grip

  • Manual controls

    Combinations of settings on the shutter spee dial and the lens's aperture ring allow you to set exposure modes including Program, Shutter Priority, Aperture Priority and Manual even when the camera is turned off.

    Advanced SR AUTO mode

    Switch the top plate to "AUTO" to select the Advanced SR AUTO mode. The camera will then automatically select the optimum auto focus and exposure settings from 58 presets.

    "C" Position for Enabling ±5-Step Exposure Compensation

    The ergonomically placed exposure compensation dial supports compensation of up to ±3-Step in 1/3 steps. Put the dial into "C" position and operate the Front Command Dial to achieve exposure compensation of up to ±5-Step while checking the results in your EVF in real time.

  • Rear Button Layout, Allowing You to Keep a Firm Grip One Hand

    All operational features that are frequently used while shooting are concentrated to the right of the FUJIFILM X100F's LCD monitor for easy and quick operation with your right thumb.

    Focus Lever for Quick Selection of Focus Areas

    The FUJIFILM XE3 is the first lens-integrated X Series camera that features the Focus Lever. It moves in eight directions (up / down, right / left and diagonally) so that you can swiftly move your AF point selection while maintaining composition.

  • VIEWFINDER AND TOUCHSCREEN LCD

    your window to the world

    Advanced Hybrid Viewfinder | Electronic Viewfinder
    | Touchscreen LCD monitor

  • Real Time Viewfinder

    Equipped with a 0.62x*1 / 100% field of view and 2.36M-dot organic EL electronic viewfinder, projecting subjects clearly evenin bright outdoors scenes.

    Boasting a display time lag of just 0.005 seconds, in addition to continuing to capture the subject in real time, the viewfinder also reflects shooting effects such as exposure settings and Film Simulation.

    Electronic Viewfinder (EVF)

    Optical Viewfinder (OVF)

  • Touchscreen LCD

    Intuitive touchscreen operation. The rear LCD monitor adopts an electrostatic touch panel display, supporting intuitive operation with your fingertips such as flick, double tap, tap, drag, and pinching in and out.

    Touch panel operation when using the EVF

    It's also possible to use the touch panel while looking into the viewfinder. According to the operation method, it's possible to set the effective range of the touch panel to the full screen, right half, left half, or OFF.

  • FILM SIMULATION

    FUJIFILM's legendary color reproduction


    Film Simulation focus on the philosophy of color-creation

    Incorporating knowledge accumulated during over 80 years of film production, Film Simulation allow users to enjoy a rich variety of color and gradation reproductions according to their subject, shooting scene, and expression intent. Users can choose from a total of 15 different types, just as if they were changing films.

    Grain effect

    By adding grain to selected photos, it is possible to give photos a texture with a film-like tone. The user can select from OFF, weak, and strong.

    Grain effect OFF

    Grain effect ON (Strong)

  • PERFORMANCE

    NEW ELITE PERFORMANCE

  • Newly Developed APS-C SensorTM***, X-Trans CMOS III

    The FUJIFILM X100F features the X-Trans CMOS III sensor specifically designed for the X Series. The X-Trans CMOS III uses an aperiodic color filter array to eliminate the need for an optical low-pass filter. The 24.3MP APS-C sensor controls noise beautifully despite its increased pixel count, allowing the standard sensitivity range to be boosted to ISO12800, which was in the extended sensitivity range in previous models. Additionally, the phase detection area has been expanded to enable phase detection AF, allowing the camera to function with greater speed and accuracy than ever before.

    All New Engine, X-Processor Pro

    The FUJIFILM X100F uses newly developed X-Processor Pro as its image processing engine, achieving processing speeds of about 4 times faster than previous models. It draws out the full capability of the X-Trans CMOS III sensor which supports high-speed data read to dramatically improve response time. The X-Processor Pro also helps display a moving subject more smoothly, thanks to the improvement of the refresh rate to 60fps for the LCD monitor and EVF's Live View mode. The engine has reduced the camera's startup time to approx. 0.5 seconds, shortening the time required from powering on to shooting - so you won't miss a beat.

  • FUNCTION AND ACCESSORIES

    Function allowing the user to easily enjoy advanced art expressions

    Included Flash | Auto Bracketing | Multiple Exposures | Panorama | Movie Shooting
    Prime Lenses | Zoom Lenses | Teleconverter | Macro Extension Tube

  • Advanced Filter

    Use this function to apply various filter effects to broaden your scope of artistic expressions. There are eight filters available, including High Key for reduced contrast and brighter tones overall, Toy Camera for a retro appearance, and Partial Color for retaining a specific color range and turning the rest into monochrome. You can check the filter effect in real time while shooting through your EVF and LCD.

  • Connectivity

    Wireless communication with bluetooth ®

    The first camera in the X Series to be equipped with Bluetooth functionality, the camera can pair with your smartphone and always stay connected. With images automatically transferred, the connection between the camera and your smartphone or tablet is even smoother. Remote shooting and viewing of images stored within the camera is also possible.